CVE-2023-27368 is a stack-based buffer overflow in the soap_serverd binary of the NETGEAR RAX30, triggered while parsing SOAP message headers. It can bypass authentication. NVD scores it 8.8, High, with no login needed. NETGEAR lists firmware 1.0.10.94 as the fix. Update the router now.
What's affected
NVD lists the NETGEAR RAX30 and RAXE300 as affected, as firmware and hardware entries without a version range. The advisory lists the RAX30 only and does not name vulnerable firmware builds.
Source conflict on severity: NVD scores this 8.8, High (vector CVSS:3.1/AV:A/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H). NETGEAR's own advisory (PSV-2022-0348, multiple vulnerabilities on the RAX30) rates the issue High, with a CVSS 3.0 score of 8.4. The two scores are close, and the fix is the same.
How to check if you're exposed
Log in to the router's admin page, or open the NETGEAR Nighthawk app, and read the firmware version. Compare it with the fixed version above. Anything lower than the fixed build needs the update.
The advisory does not publish a list of vulnerable builds, so the fixed version is the only reliable cutoff. If you look after more than a few routers, build a simple list of model and firmware version for each one. These devices often sit in small offices and branch sites that never reach a central inventory.
What to do now
- Update the router to firmware 1.0.10.94 or later. NETGEAR recommends doing this as soon as possible, through the Nighthawk app or by downloading the build from NETGEAR Support for your model.
- Read the release notes for that firmware before installing, and finish all the steps NETGEAR lists. The advisory warns that the vulnerability remains if you skip any of them.
- Review who can reach the router's local network. Rotate the WiFi password if it has been shared widely, and keep guest devices on a separate network.
- Record the update in your asset list so you can show which routers are on the fixed build.
- Look up the CVE on its Gold page to follow changes in the score and references.
Why it matters
According to the record, soap_serverd does not check the length of data in SOAP message headers before copying it to a fixed-length stack buffer. The result NVD describes is an authentication bypass, not direct code execution. The weakness classes are CWE-121 (Stack-based Buffer Overflow) and CWE-787 (Out-of-bounds Write).
Authentication bypass bugs are valuable to an attacker because they unlock the post-login flaws. This router's advisory also covers command injection that needs a login, so the bypass and the injection together are more serious than either alone.
The phrase network-adjacent matters here. NVD scores the attack vector as adjacent, and NETGEAR's advisory says an attacker needs your WiFi password or an Ethernet connection to your network. That is a lower bar than a remote internet attack, but a higher bar than none. Guest WiFi, shared office space and a compromised laptop on the same network all shorten the distance.
Quick check
Does the record say this bug runs code?
No. NVD describes an authentication bypass. Code execution comes from other flaws in the same advisory.
Sources
Last reviewed: 19 October 2026.