Safeguard
Vulnerability Analysis•

CVE-2023-27367: High Command Injection in NETGEAR RAX30 libcms

CVE-2023-27367 is a command injection in the NETGEAR RAX30 libcms_cli module, with a bypassable login. Update to firmware 1.0.10.94 or later.

Safeguard Security Team
3 min read

CVE-2023-27367 is a command injection flaw in the libcms_cli module of the NETGEAR RAX30. NVD scores it 8.0, High. NETGEAR's advisory rates the group of issues High at 8.4 and lists firmware 1.0.10.94 as the fix. Update the router, since the advisory fixes several related issues together.

What's affected

NVD lists the NETGEAR RAX30 and RAXE300 as affected, as firmware and hardware entries without a version range. The advisory lists the RAX30 only and does not name vulnerable firmware builds. It covers several issues, including the two other SOAP issues covered in sibling posts in this series (CVE-2023-27368 and CVE-2023-27369).

Source conflict on severity: NVD scores this 8.0, High (vector CVSS:3.1/AV:A/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H). NETGEAR's own advisory (PSV-2022-0348, multiple vulnerabilities on the RAX30) rates the issue High, with a CVSS 3.0 score of 8.4. The advisory score is for the bundle, so it may not describe this single CVE.

How to check if you're exposed

Log in to the router's admin page, or open the NETGEAR Nighthawk app, and read the firmware version. Compare it with the fixed version above. Anything lower than the fixed build needs the update.

The advisory does not publish a list of vulnerable builds, so the fixed version is the only reliable cutoff. If you look after more than a few routers, build a simple list of model and firmware version for each one. These devices often sit in small offices and branch sites that never reach a central inventory.

What to do now

  1. Update the router to firmware 1.0.10.94 or later. NETGEAR recommends doing this as soon as possible, through the Nighthawk app or by downloading the build from NETGEAR Support for your model.
  2. Read the release notes for that firmware before installing, and finish all the steps NETGEAR lists. The advisory warns that the vulnerability remains if you skip any of them.
  3. Review who can reach the router's local network. Rotate the WiFi password if it has been shared widely, and keep guest devices on a separate network.
  4. Record the update in your asset list so you can show which routers are on the fixed build.
  5. Look up the CVE on its Gold page to follow changes in the score and references.

Why it matters

The record says a user-supplied command is not validated before it is used to run a system call, giving code execution as root. Authentication is required, but NVD notes the existing mechanism can be bypassed. NVD classes the flaw as CWE-78 (OS Command Injection).

That bypass note links this CVE to its neighbours. The same advisory covers authentication bypass bugs in the SOAP service, so an attacker who can chain them does not need credentials. This is the reason to treat the whole advisory as one update rather than three separate decisions.

The phrase network-adjacent matters here. NVD scores the attack vector as adjacent, and NETGEAR's advisory says an attacker needs your WiFi password or an Ethernet connection to your network. That is a lower bar than a remote internet attack, but a higher bar than none. Guest WiFi, shared office space and a compromised laptop on the same network all shorten the distance.

Quick check

Which fix covers this CVE?

Firmware 1.0.10.94 or later for the RAX30, per the NETGEAR advisory the record links.

Sources

Last reviewed: 19 October 2026.

Never miss an update

Weekly insights on software supply chain security, delivered to your inbox.

We email you a link to confirm, and only then add you to the list. Unsubscribe in one click. Privacy

Self-healing security runs on Safeguard.

Your first fix PR is minutes away.

No sales call required, even your agent can complete the purchase over MCP.