CVE-2021-46902 is a high severity path validation flaw in the LTOS web interface of Meinberg LANTIME firmware, scored 7.2 by NVD. An admin can read or delete files outside the intended area. Meinberg fixed it in firmware 7.04.008 and 6.24.029, and recommends version 7.04.008.
What's affected
The record says the LTOS web interface in LANTIME firmware before 6.24.029 and 7 before 7.04.008 mishandles path validation, so an admin can read or delete files in violation of the expected access controls. The vector is CVSS:3.1/AV:N/AC:L/PR:H/UI:N/S:U/C:H/I:H/A:H, which needs a high privilege account.
Meinberg's security advisory MBGSA-2021.03, dated 15 November 2021, lists the issue as improper path validation in the configuration store and delete function. It says an admin user could delete and view files without authorisation, and that the issue was found by milCERT Austria. It is fixed from 7.04.008 (MBGID-6257) and 6.24.029 (MBGID-9341), and Meinberg recommends updating to 7.04.008. Its workaround is to lock admin users.
The sources disagree on severity. NVD scores the record 7.2 High, while the advisory rates this item medium, with the whole advisory covering a mix of high, medium and low issues. Both are correct for what they measure, since the advisory rates the practical threat and NVD scores by vector. Plan on the higher number.
Weakness class: CWE-22.
How to check if you're exposed
Open the LANTIME web interface, or the command line, and read the installed firmware version. Anything on the 7 line before 7.04.008, or on the 6 line before 6.24.029, is in range.
Time servers are easy to forget because they run for years without attention. Check every LANTIME unit, including ones in remote sites and lab racks, and record the version for each.
Then list the accounts with administrator rights on each device. The advisory's workaround of locking admin users shows where the risk sits.
What to do now
- Inventory every Meinberg LANTIME device and its firmware version.
- Update to 7.04.008, or to 6.24.029 on the 6 line if you cannot move to 7.
- Apply the vendor workaround of locking admin users on devices that cannot be updated yet.
- Put the web interface on a management network only.
- Review who has admin accounts and remove stale ones.
Why it matters
Path validation bugs happen when a program builds a file path from a user supplied name and does not confirm that the final path stays inside the intended folder. Special sequences in the name can then step outside it. The record files this as CWE-22, path traversal.
Here the actor is an admin, so the flaw does not give outsiders anything on its own. It does break the expectation that admin rights in the web interface are limited to that interface. Reading or deleting arbitrary files on a time server can reveal configuration and can break the service that other systems rely on.
Network time is a quiet dependency. If time servers drift or stop, logs lose their order, certificates fail and authentication protocols reject tickets. Keeping them patched, and keeping admin access narrow, is cheap protection.
This CVE is not listed in the CISA Known Exploited Vulnerabilities catalog, and none of the pages I read state that it is exploited in the wild. That is a statement about what is known, not a reason to delay the fix.
Quick check
Which firmware fixes CVE-2021-46902?
Meinberg's advisory MBGSA-2021.03 lists 7.04.008 and 6.24.029 as the fixed versions, and recommends 7.04.008.
Why do NVD and Meinberg differ on severity?
NVD scores it 7.2 High from the vector. The advisory rates the item medium. Treat it as high until you have reviewed your admin accounts.
Sources
Last reviewed: 19 October 2026.