Safeguard
Vulnerability Analysis•

CVE-2023-34198: High Filter Rule Flaw in Stormshield Network Security

CVE-2023-34198 makes a disabled DHCP interface object act as Any in Stormshield SNS filter rules. Fixed in 3.7.37, 3.11.25, 4.3.19, 4.6.6 and 4.7.1.

Safeguard Security Team
3 min read

CVE-2023-34198 is a Stormshield Network Security flaw that NVD scores high (CVSS 7.3) and the vendor rates low. If an interface in DHCP client mode is turned off, filter rules that use its network object treat it as Any. Fixed versions are 3.7.37, 3.11.25, 4.3.19, 4.6.6 and 4.7.1.

What's affected

  • SNS 1.0.0 through 3.7.36, fixed in 3.7.37.
  • SNS 3.8.0 through 3.11.24, fixed in 3.11.25.
  • SNS 4.0.0 through 4.3.18, fixed in 4.3.19.
  • SNS 4.4.0 through 4.6.5, fixed in 4.6.6.
  • SNS 4.7.0, fixed in 4.7.1.

Only rules that use a network object created from an interface in DHCP client mode are affected, and only when that interface is disabled. The record carries no CWE.

How to check if you're exposed

In the SNS administration interface, check the firmware version and compare it with the list above.

Then review the filter policy. Look for rules whose source or destination is a network object created from an interface that uses DHCP client mode. The vendor says such objects cover the adjacent network provided by the DHCP service, so using them in filter rules is unusual. If you find none, the practical exposure is low.

For any interface in DHCP mode that is currently disabled, review what the rules that reference it now permit.

What to do now

  1. Upgrade SNS to the fixed release for your branch: 3.7.37, 3.11.25, 4.3.19, 4.6.6 or 4.7.1.
  2. Search filter rules for network objects built from DHCP client mode interfaces, and replace them with explicit address objects.
  3. If you must disable an interface in DHCP client mode, set a temporary static IP address first, as the vendor workaround advises.
  4. Document which firewall rules depend on interface objects so a change to an interface does not silently widen a rule.
  5. Test policy behavior after any interface change in a lab or maintenance window.

If you track software dependencies, the free in-browser dependency scan can show which of your components carry known CVEs, and the Gold directory lists the same records in one place.

Why it matters

Firewalls evaluate rules against objects, and the meaning of an object can change when the thing it refers to changes. Here, disabling a DHCP interface causes its object to collapse to Any. A rule that was narrow becomes broad without any edit to the rule itself, which is the sort of drift that access reviews often miss.

Severity differs between sources. NVD records CVSS 7.3. The Stormshield advisory rates it low, shows a base score of 4.3 and an overall environmental score of 3.3, and describes the usage of such objects as really unusual. Both are worth knowing. The score on the page you read may depend on which source it uses.

The record shows this CVE is not in the CISA Known Exploited Vulnerabilities catalog.

Quick check

Is this really high severity?

NVD says 7.3 High. The vendor advisory says low, with a CVSS v3.1 base score of 4.3. The vendor notes that rules using these objects are unusual.

What is the workaround?

Use a temporary IP address instead of DHCP when you turn the interface off, and avoid using that interface network object in rules while it is disabled.

Sources

Last reviewed: 19 October 2026.

Never miss an update

Weekly insights on software supply chain security, delivered to your inbox.

We email you a link to confirm, and only then add you to the list. Unsubscribe in one click. Privacy

Self-healing security runs on Safeguard.

Your first fix PR is minutes away.

No sales call required, even your agent can complete the purchase over MCP.