CVE-2023-28078 is a critical flaw in Dell SmartFabric OS10 switches running 10.5.2.x and above with VLT configured. A remote unauthenticated attacker could read sensitive data and cause a denial of service through ZeroMQ. NVD and Dell score it 9.1. Dell lists a fixed release for each branch.
What's affected
Dell advisory DSA-2023-124 lists these affected branches and fixed releases:
- 10.5.5.0 and 10.5.5.3: fixed in 10.5.5.5.
- 10.5.5.x on MX platforms: fixed in 10.5.5.4.
- 10.5.4.x: fixed in 10.5.4.8.
- 10.5.4.x on MX platforms: fixed in 10.5.4.9.
- 10.5.3.x: fixed in 10.5.3.8.
- 10.5.2.x: fixed in 10.5.2.12.
Check the advisory table for your exact platform and version, because MX platforms have their own fix numbers. Severity: NVD and Dell both give 9.1, vector CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:H. Dell's text calls it a high severity issue, which is the same finding described in words and not a conflicting score.
How to check if you're exposed
Log in to the switch and run show version to read the OS10 release. Then check whether Virtual Link Trunking (VLT) is configured on the device, using show vlt followed by the domain ID in your configuration, or by reviewing the running configuration. The record ties the flaw to switches where VLT is configured.
Compare the release with the fixed numbers above. A switch with VLT on a vulnerable release should go to the top of the list.
What to do now
- Plan an upgrade to the fixed release for your branch, and for your platform if you run MX.
- Dell lists no workaround, so network access control is the only stopgap. Keep the switch management and VLT interconnect networks off untrusted segments.
- Schedule the upgrade in a maintenance window, since switch reloads affect traffic.
- Review the other vulnerabilities listed in the same Dell advisory, because the upgrade covers several.
- Check the Gold page for this CVE for later changes.
Why it matters
The record classes the flaw as CWE-923 (Improper Restriction of Communication Channel to Intended Endpoints), which describes a communication channel that is reachable by parties who should not reach it. ZeroMQ is a messaging library. When VLT is configured, the switch exposes a messaging service, and the record says a remote attacker without credentials can reach it.
Two effects are described. Data on the switch can be read, and a large number of requests can cause a denial of service. Core switches carry traffic for everything attached to them, so a loss of service or a leak of their configuration data matters well beyond one device.
Try it yourself
Click through it at your own pace, or open it full screen.
Quick check
Does the flaw need VLT to be configured?
Yes. The record says the issue applies to switches running 10.5.2.x and above when VLT is configured.
Sources
Last reviewed: 19 October 2026.