CVE-2023-27360 is a remote code execution flaw in the NETGEAR RAX30, caused by the configuration of its lighttpd web server. NVD scores it 8.8, High, with no authentication required. NETGEAR lists firmware 1.0.10.94 as the fix in its multi-issue RAX30 advisory.
What's affected
NVD lists the NETGEAR RAX30 and RAXE300 as affected, as firmware and hardware entries without a version range. The advisory covers the RAX30 only and does not list which earlier firmware builds are vulnerable.
Source conflict on severity: NVD scores this 8.8, High (vector CVSS:3.1/AV:A/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H). NETGEAR's own advisory (PSV-2022-0352, multiple vulnerabilities on the RAX30) rates the issue a range from Medium to High, with scores from 5.1 to 8. The NETGEAR advisory bundles four issues and does not map a single score to this CVE, so a direct comparison is not possible. The fixed firmware is the same.
How to check if you're exposed
Log in to the router's admin page, or open the NETGEAR Nighthawk app, and read the firmware version. Compare it with the fixed version above. Anything lower than the fixed build needs the update.
The advisory does not publish a list of vulnerable builds, so the fixed version is the only reliable cutoff. If you look after more than a few routers, build a simple list of model and firmware version for each one. These devices often sit in small offices and branch sites that never reach a central inventory.
What to do now
- Update the router to firmware 1.0.10.94 or later. NETGEAR recommends doing this as soon as possible, through the Nighthawk app or by downloading the build from NETGEAR Support for your model.
- Read the release notes for that firmware before installing, and finish all the steps NETGEAR lists. The advisory warns that the vulnerability remains if you skip any of them.
- Review who can reach the router's local network. Rotate the WiFi password if it has been shared widely, and keep guest devices on a separate network.
- Record the update in your asset list so you can show which routers are on the fixed build.
- Look up the CVE on its Gold page to follow changes in the score and references.
Why it matters
The record says the web server configuration allows execution of files from untrusted sources, which leads to code execution as root. NVD classes it under CWE-345 (Insufficient Verification of Data Authenticity) and CWE-346 (Origin Validation Error).
This is a configuration weakness, not a coding mistake in one function. Nothing is wrong with the lighttpd project itself in this record. The product shipped it set up in a way that trusted content it should not have trusted. Hardening of that kind is one reason router firmware is worth updating even when you did not change any settings.
The phrase network-adjacent matters here. NVD scores the attack vector as adjacent, and NETGEAR's advisory says an attacker needs your WiFi password or an Ethernet connection to your network. That is a lower bar than a remote internet attack, but a higher bar than none. Guest WiFi, shared office space and a compromised laptop on the same network all shorten the distance.
Quick check
Is there a workaround?
The advisory I read does not list one. NETGEAR says to update the firmware and finish all recommended steps.
Sources
Last reviewed: 19 October 2026.