CVE-2022-32204 is a high severity input validation flaw in the Huawei CV81-WDM printer, scored 7.5. Sending a large number of packets to a specific port can cause the service to fail. Huawei lists firmware 01.70.49.29.46 as affected and 01.94.59.32.46 as resolved. Update the firmware.
What's affected
Huawei's advisory huawei-sa-20220608-01 lists the CV81-WDM with firmware 01.70.49.29.46 as affected and 01.94.59.32.46 as the resolved version. It reports no temporary fix. Printers that support automatic update will prompt for the system update.
The advisory describes the issue as improper input verification. An attacker who can reach the device and send a large number of packets to a specific port can make the service abnormal. Its score is 7.5 with a temporal score of 7.0, and NVD gives the same base score. The vector is network, no privileges, no user interaction, and high impact on availability only.
The advisory's initial and last release dates both read 6 June 2022, and it credits an internal Huawei tester. The record's kev flag is false. This CVE is one of three Huawei CV81-WDM printer advisories handled in the same batch; the others cover a command injection, and a second input verification flaw.
Weakness class per the record: CWE-20.
How to check if you're exposed
Printer firmware is shown on the device's information or settings page, and in its web administration page if that is enabled. Look for the firmware version of the CV81-WDM and compare it with 01.70.49.29.46 (affected) and 01.94.59.32.46 (resolved).
Then check network exposure. Find out whether the printer is reachable from user networks, guest networks or the internet, and use your network scanner to find unexpected printers of this model.
What to do now
- Identify CV81-WDM printers and their firmware versions.
- Update to 01.94.59.32.46 or later.
- Restrict access to printer network ports to print servers and trusted users.
- Monitor for printers that stop responding, since this flaw affects availability.
Why it matters
The weakness class is improper input validation (CWE-20). The device does not strictly handle what arrives on a network port, and a flood of packets pushes it into a failed state.
The result is a denial of service, not a takeover. For a printer that is an inconvenience, but in places where printing is part of a workflow, such as logistics or healthcare reception, an outage matters.
The fix and the mitigation are simple: update the firmware, and keep network ports closed to people who have no need for them.
Quick check
Does this give an attacker control of the printer?
No. The advisory and the score describe an availability impact only, with service abnormality as the result.
Sources
Last reviewed: 19 October 2026.